flash.sh

Overview

flash.sh — write the openaliro ESP32 Matter lock to a board with esptool. One merged image (bootloader, partition table and app) at offset 0x0. See FLASH.md for wiring and first run. Usage: bash flash.sh [--chip esp32s3|esp32c5|esp32c6] [PORT] bash flash.sh ask which chip, let esptool find the port bash flash.sh --chip esp32c6 no question bash flash.sh --chip esp32s3 /dev/ttyACM0 The bundle ships an image for each of three chips, and writing the wrong one gives a board that flashes cleanly and then never boots. So the chip is asked for rather than assumed: this script used to hardcode the S3 and ignore the other two images entirely.