release/dwm3001cdk/flash.sh
openaliro/openaliro
Module

flash.sh

flash.sh — program the openaliro DWM3001CDK firmware over its on-board J-Link.

release/dwm3001cdk/flash.sh

Overview

flash.sh — program the openaliro DWM3001CDK firmware over its on-board J-Link. See FLASH.md for the full walkthrough. Usage: bash flash.sh [JLINK_SERIAL_NUMBER] One image, not two: the nRF52833 is a single-core part, so unlike the nRF5340 DK there is no separate network-core hex to write.